|
Revision |
Description |
Date |
|
|
|
1.37 |
|
# |
Corrections |
|
1 |
Deflection error corrected for 1/2 in.
thick glass with 5 psf load. |
|
1/27/10 |
|
|
|
1.34 |
|
# |
Corrections |
|
1 |
Data error when designing a large IG
unit with a laminated glass designed with 3/32 in. ply. |
|
11/19/09 |
|
|
|
1.33 |
|
# |
Corrections |
|
1 |
SDG Rework |
|
10/14/09 |
|
|
|
1.32 |
|
# |
Corrections |
|
1 |
Added 'refresh' button to multiple
glazing input window. |
|
10/1/09 |
|
|
|
1.31 |
|
# |
Corrections |
|
1 |
SDG rework |
|
|
|
|
|
1.30 |
|
# |
Corrections |
|
1 |
SDG rework |
|
4/21/09 |
|
|
|
1.29 |
|
# |
Corrections |
|
1 |
Character error |
|
7/16/08 |
|
|
|
1.28 |
|
# |
Corrections |
|
1 |
Program chose incorrect lite thickness
for calculations in Multiple Glazing Input option. This has
been corrected. |
|
2 |
Editorial correction in printed
report. |
|
7/8/08 |
|
|
|
1.27 |
|
# |
Corrections |
|
1 |
The limits using DuPont's SentryGlas®
Plus interlayer have been corrected. |
|
2 |
A length value in the 3-sided,
annealed chart has been corrected. |
|
6/16/08 |
|
|
|
1.26 |
|
# |
Corrections |
|
1 |
More NFL calculation glitches caught. |
|
4/16/08 |
|
|
|
1.25 |
|
# |
Corrections |
|
1 |
Fixed glitch in NFL calculations |
|
4/2/08 |
|
|
|
1.24 |
|
# |
Corrections |
|
1 |
Update was not reading old serial
number (pre June 2007) correctly and defaulting to the basic
package. This has been corrected. If you purchased your
software recently, this update is not necessary. |
|
3/6/08 |
|
|
|
1.23 |
|
# |
Corrections |
|
1 |
More corrections for deflection calculations with
upgraded programming. |
|
2/14/08 |
|
|
|
1.22 |
|
# |
Corrections |
|
1 |
Corrected deflection calculations with
upgraded programming. |
|
2/1/08 |
|
|
|
1.21 |
|
# |
Corrections |
|
1 |
Corrected error message when using
earlier design standards. |
|
1/30/08 |
|
|
|
1.20 |
|
# |
Corrections |
|
1 |
Corrected thickness used for angled
lite, long duration load calculations. |
|
2 |
Updated and reconstructed deflection
and load charts. This edit does not change the output for the
program. |
|
1/25/08 |
|
|
|
1.19 |
|
# |
Corrections |
|
1 |
Corrected load share value
calculations including a laminate lite and a monolithic lite of
equal thicknesses. |
|
6/11/07 |
|
|
|
1.18 |
|
# |
Corrections |
|
1 |
Corrected the Load Share Factors when
using the Theoretical Load Share option and entering a negative
load. For Deluxe and Standard versions. |
|
3/23/07 |
|
|
|
1.17 |
|
# |
Corrections |
|
1 |
Lite thickness defaults to 1/4 inch
(6.0 mm) |
|
2 |
Corrected load calculation error when
using SentryGlas®Plus interlayer, 5/16 inch (8 mm)
thickness and a 3-sided support. |
|
2/19/07 |
|
|
|
1.16 |
|
# |
Corrections |
|
1 |
Added exception from ASTM E 1300 - 04,
Chapter 3.2.3.2 c):
"The construction of two 6
mm (1/4 inch) glass plies plus 0.76 mm (0.03 inch) interlayer
shall be defined as 12 mm (1/2 inch)."
|
|
2 |
Corrected nominal thickness
calculation with SentryGlas®Plus or Saflex®HP
interlayers. |
|
1/31/07 |
|
|
|
1.15 |
|
# |
Corrections |
|
1 |
Calculation error for nominal
thickness for laminated, symmetric glass when using the 2002/03/04
standard. |
|
1/2/07 |
|
|
|
1.14 |
|
|
|
|
|
1.13 |
|
# |
Corrections |
|
1 |
Corrected error in glass type factor
calculator with SentryGlass Plus and Saflex interlayer long duration
calculations. |
|
9/5/06 |
|
|
|
1.12 |
|
# |
Corrections |
|
1 |
Corrected character error for users of
Chinese Windows version. |
|
6/27/06 |
|
|
|
1.11 |
|
|
|
|
|
1.10 |
|
# |
Corrections |
|
1 |
Set lower boundary for laminated non-factored
load charts. Displays "greater than [largest value]" for
non-factored load. |
|
2 |
Corrected refresh error |
|
5/1/06 |
|
|
|
1.9 |
|
# |
Corrections |
|
1 |
Set lower boundary for non-factored
load charts. Displays "greater than [largest value]" for
non-factored load. |
|
2 |
Corrected error message when <Enter>
button is hit for calculations. |
|
3 |
Pushes correct units "button" when a
recently used file is selected. |
|
4/18/06 |
|
|
|
1.8 |
|
# |
Corrections |
|
1 |
Corrected Saflex Non-Factored load
charts |
|
2 |
Corrected minor anomaly in deflection
calculation. (Odd configuration that caused a very large
deflection value to show.) |
|
4/14/06 |
|
|
|
1.7 |
|
# |
Corrections |
|
1 |
Corrected Label error in Range Value
output spreadsheet. |
|
3/23/06 |
|
|
|
1.6 |
|
# |
Corrections |
|
1 |
Corrected Multiple Glazing Input
spreadsheet errors and lite manager connection. |
|
2/8/06 |
|
|
|
1.5 |
|
# |
Corrections |
|
1 |
Corrected error in Auto-Thickness
calculations |
|
12/2/05 |
|
|
|
1.4 |
|
# |
Corrections |
|
1 |
Recently Used Files menu works |
|
2 |
Glass Charts/Shapes reorganized |
|
11/23/05 |
|
|
|
1.3 |
|
# |
Corrections |
|
1 |
Corrected long duration LSF |
|
2 |
Corrected long duration laminate
limits |
|
3 |
Corrected interlayer display/refresh error |
|
10/18/05 |
|
|
|
1.2 |
|
# |
Corrections |
|
1 |
Corrected display for larger DPI
settings |
|
7/6/05 |
|
|
|
1.1 |
|
# |
Corrections |
|
1 |
Report Header |
|
2 |
Display correct interlayer
non-factored load chart |
|
3 |
Nominal thickness calculation error |
|
1/6/05 |
